AUTOMATIC VACUUM CONTROLLER
pdf brochure
The controller consists of three key components all located within the controller housing
- Stainless steel pressure sensor
- Process controller
- Stainless steel solenoid control valve
SPECIFICATIONS & ORDERING INFO
| Vacuum Controller | ||||
|---|---|---|---|---|
| Cat. No. | ; | |||
| Description | AVC Distillation Controller, 115V, 60HZ | AVC Distillation Controller with build in serial comm car | Required with Model 1620, Windows software for vacuum pressure display,logging and remote control | Glass secondary cold trap, accepts 1/4 in. (7mm) ID hose, 1L round bottom flask |
VACUUM REGULATOR (bench mount)
pdf brochure The Vacuum Regulator is a small, portable unit, which is
ideal for many applications requiring Vacuum Regulation.
- Chemical Resistant
- No mercury
- Wetted Parts are 100% Stainless Steel.
CAUTION: Do not use with DUOSEAL, CHEMSTAR or Direct-Drive pumps.
ORDERING INFO
| Vacuum Regulator | |
|---|---|
| Cat No. | 1422A $427.32 |
| Pump Model | 2010,2012,2022,2030,2015,2017,2021,2031,2561,2567,2581,2585 |
VACUUM REGULATOR (Pump Mount)
Connects to pump intake for easy regulation of vacuum level. ORDERING INFO
| Vacuum Regulator | |
|---|---|
| Cat No. | 1421D $256.39 |
| Pump Model | 2012,2022,2030,2015,2017,2010,2021,2031 |
DIAL VACUUM GAUGE
Inexpensive gauge for measuring vacuum level. Not an absolute pressure gauge.
SPECIFICATIONS & ORDERING INFO
| Dial Vacuum Gauge | ||||
|---|---|---|---|---|
| Cat. No. | 726021 $38.17 |
; | 726020 $72.78 |
726023 $120.00 |
| Dial Diameter | 2 in. O.D | 2 in. O.D. | 2 1/2 in.O.D. | 2 in. O.D. |
| Unit of Measure | in. Hg, cm Hg (brass) | Pascal (Brass) | in. Hg, mm Hg (Brass) | in. Hg, mm Hg (stainless) |
| Connection | 1/8" male NPT | 1/8" male NPT | 1/4" male NPT | 1/8" male NPT |
POCKET TORR VACUUM GAUGE
This gauge is convenient and simple to use. A touch panel switches from continuously on, to on for 10 seconds on demand to conserve battery power. Calibration is also done via the touch panel following a simple routine. Includes AC adapter. 9V battery not included.
SPECIFICATIONS & ORDERING INFO
| Pocket Torr Vacuum Gauge | |
|---|---|
| Cat. No. | |
| Range (Torr) | 1 to 760 |
| Vacuum Connection | 1/4 in I.D. hose barb |
| Sensor | Capacitance |
Thermocouple Vacuum Gauges
- Vacuum measurement to low millitorr (micron) range
- Rugged, reliable thermocouple gauges
- Single probe and three probe models
- Portable, lightweight
SPECIFICATIONS & ORDERING INFO
| Gauge | |
|---|---|
| Cat. No. |
1515 $867.26 |
| Stations | 1 |
| Gauge Tube | |
| Cat. No. |
1515A $147.37 |
| Connector1 | 1/8 in. NPT - male |
| Gauge Tube Cable Cat. No. |
- |
| Length | - |
| Protective Trap | |
| Cat. No. | |
| Millitorr Range | 0-5000 |
- Use vacuum sealant part no. 1-99-5282 when installing to a NPT connection.
(CAUTION: Models 1515 should not be used to measure the pressure of flammable or explosive gases or vapors.)
| Description | Cat. No. |
|---|---|
Welch Single Stage Thermocouple Vacuum Gauge. Meter scale graduated 0-5000 Millipore. Includes one permanently attached gauge tube cable and one gauge tube. 7 in. wide x 5 in. deep x 5.6 in. high (17.8 x 12.7 x 14.1 cm). 2 lbs (0.9 kg). Wired for115V, 60 Hz, 1 PH with N. American 115V plug. |
